Someone forwarded a spammer's email to Spamnesty, which replied to the email, pretending to be a person called Paul Ross and starting a conversation.
This is that conversation.
Seal of the Federal Bureau of Investigation
OFFICIAL LETTER FROM FEDERAL BUREAU OF
INVESTIGATION FBI DIRECTOR CHRISTOPHER A WRAY
OF INVESTIGATION FBI.WASHINGTON DC.
FBI SEEKING TO WIRETAP INTERNET
ATTENTION: BENEFICIARY
I'M CHRISTOPHER A WRAY EXECUTIVE DIRECTOR FBI FEDERAL BUREAU OF INVESTIGATION WASHINGTON DC. FBI SEEKING TO WIRETAP INTERNET
The
federal bureau of investigation (FBI)through our
intelligence-monitoring network has discovered that the transaction that
the bank contacted you previously was legal.Recently the fund has been
legally approved to be paid via BANK delivery process. So we the federal
bureau of investigation (FBI) Washington Dc, in conjunction with the
United Nations (UN) financial department have investigated through our
monitoring network noting that your transaction with the Bank of Canada
have the legitimate right to complete your transaction to claim your
fund US$40.7,000,000.00 (Forty million Seven Hundred Thousand united
states dollars) because of so much scam going on in Canada and USA, the
federal bureau of investigation decided to contact the FedEx Courier
Service Company in Canada, for them to give us their procedures on how
to send this money to you without any further complaint or delay. We
just got information from the Bank of Canada and they have loaded your
$40.7,000,000.00 in ATM CARD and submitted it to the FedEx courier
service company for immediate delivery to your doorstep.
You are
required to choose one option, which you will be able to pay and also
convenient for you, for quick delivery of your parcel containing your
ATM CARD and other two original back up documents.
Service Type | Delivery Duration | Charges/Fees
------------------------------ ------------------------------ ---------------
Premium Express (24hrs Delivery)
Mailing $60.00 00.00
Insurance $100.00 00.00
Vat $60.00 00.00
TOTAL $245.00
$220(Two Hundred and Twenty US Dollars Only).
.............................. .............................. ..........
Special Express (2 Days)
Mailing $130.00 00.00
Insurance $50.00 00.00
Vat $20.00 00.00
TOTAL $200.00
$200(Two Hundred US Dollars Only).
.............................. .............................. ................
Economy Express (3Days)
Mailing $50.00 00.00
Insurance$?30.00 00.00
Vat (5%) $28.00 00.00
TOTAL $108.00 00.00
$108(One hundred and eight US Dollars Only).
.............................. .............................. ........
You
are hereby required to advise us on your parcel delivery option by
filling in the required form stated above. Please note that the deadline
for claiming your fund is exactly one week after the receipt of this
email. After this period, your fund will be returned back to the
ordering customer. That's the instruction given to us So take note. We
request that you reconfirm your mailing address to ensure conformity
with our record for immediate dispatch of your parcel to you. Only valid
residential/ Office addresses and postal addresses are certified OK.
DELIVERY DESTINATION INFORMATION:
------------------------------ ------------------------------ -
Receiver's Name :............................. .................
Address:...................... .............................. ...........
Tel/:......................... .............................. ...............
Delivery Information/ Parcel Description
------------------------------ ------------------------------ ---------------
Delivery Terms: .............. .......International Delivery
Condition Of Delivery..............Priority Delivery
Consignment Note No: ........... MI 49866-2110
Color of Parcel: ..................... Brown.
Total Weight: ..........................36.2 kg
Total Net Weight: ...................1.7 kg
------------------------------ ------------------------------ ----------
We
are here to protect you from any problem till you receive your package
.You can as well get in touch with the FedEx delivery company assigned
to deliver this financial package to your doorstep.
Below is the delivery companies contact information:
Company Name: Federal Express Courier Service.
Email: [email protected]
Directors Name: Mr.Frank Smith
Looking forward to hear from you as soon as you receive this message
Best Regards,
CHRISTOPHER A WRAY
Federal Bureau of Investigation
Hello,
I am a bit busy now, but I am definitely interested. When can we talk?
Paul Ross
CEO, MNesty, LLC
Hi Paul,
Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
Let me know if you have any further query or any job for us. Thanks.
On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
Hey there,
Could you tell me where you are located? Also, could you tell me more about your offer?
Paul Ross
CEO, MNesty, LLC
On 06/01/2022 20:25 PM, Roy Nelson wrote:
> Hi,
> Hope you are great.
> Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
> Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
> Looking forward to hearing from you. Thanks.
> BR,Roy Nelson, Swift Estimating | 470-284-7295
>
>
>
>
Hello,
That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
Paul Ross
CEO, MNesty, LLC
Hi Paul,
See the attached samples for your review and better understanding of our work.Review it and let me know if you have any job for us. Thanks.
On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
Hello,
That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
Paul Ross
CEO, MNesty, LLC
On 10/01/2022 18:42 PM, wrote:
> Hi Paul,
> Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
> You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
> FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
> For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> Let me know if you have any further query or any job for us. Thanks.
> On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
> Hey there,
>
> Could you tell me where you are located? Also, could you tell me more about your offer?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> > Hi,
>
> > Hope you are great.
>
> > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> > Looking forward to hearing from you. Thanks.
>
> > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
Paul,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Tue, 11 Jan 2022 at 12:35, Roy Nelson <[email protected]> wrote:
Hi Paul,
See the attached samples for your review and better understanding of our work.Review it and let me know if you have any job for us. Thanks.
On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
Hello,
That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
Paul Ross
CEO, MNesty, LLC
On 10/01/2022 18:42 PM, wrote:
> Hi Paul,
> Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
> You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
> FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
> For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> Let me know if you have any further query or any job for us. Thanks.
> On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
> Hey there,
>
> Could you tell me where you are located? Also, could you tell me more about your offer?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> > Hi,
>
> > Hope you are great.
>
> > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> > Looking forward to hearing from you. Thanks.
>
> > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
Hi,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Fri, 28 Jan 2022 at 15:19, Roy Nelson <[email protected]> wrote:
Paul,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Tue, 11 Jan 2022 at 12:35, Roy Nelson <[email protected]> wrote:
Hi Paul,
See the attached samples for your review and better understanding of our work.Review it and let me know if you have any job for us. Thanks.
On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
Hello,
That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
Paul Ross
CEO, MNesty, LLC
On 10/01/2022 18:42 PM, wrote:
> Hi Paul,
> Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
> You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
> FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
> For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> Let me know if you have any further query or any job for us. Thanks.
> On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
> Hey there,
>
> Could you tell me where you are located? Also, could you tell me more about your offer?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> > Hi,
>
> > Hope you are great.
>
> > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> > Looking forward to hearing from you. Thanks.
>
> > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
Hi,
Hope things are going well.I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Mon, 19 Sept 2022 at 16:10, Roy Nelson <[email protected]> wrote:
Hi,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Fri, 28 Jan 2022 at 15:19, Roy Nelson <[email protected]> wrote:
Paul,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Tue, 11 Jan 2022 at 12:35, Roy Nelson <[email protected]> wrote:
Hi Paul,
See the attached samples for your review and better understanding of our work.Review it and let me know if you have any job for us. Thanks.
On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
Hello,
That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
Paul Ross
CEO, MNesty, LLC
On 10/01/2022 18:42 PM, wrote:
> Hi Paul,
> Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
> You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
> FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
> For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> Let me know if you have any further query or any job for us. Thanks.
> On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
> Hey there,
>
> Could you tell me where you are located? Also, could you tell me more about your offer?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> > Hi,
>
> > Hope you are great.
>
> > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> > Looking forward to hearing from you. Thanks.
>
> > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
Hi,
Hope things are going well.I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Wed, 16 Nov 2022 at 11:34, Roy Nelson <[email protected]> wrote:
Hi,
Hope things are going well.I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Mon, 19 Sept 2022 at 16:10, Roy Nelson <[email protected]> wrote:
Hi,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Fri, 28 Jan 2022 at 15:19, Roy Nelson <[email protected]> wrote:
Paul,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Tue, 11 Jan 2022 at 12:35, Roy Nelson <[email protected]> wrote:
Hi Paul,
See the attached samples for your review and better understanding of our work.Review it and let me know if you have any job for us. Thanks.
On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
Hello,
That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
Paul Ross
CEO, MNesty, LLC
On 10/01/2022 18:42 PM, wrote:
> Hi Paul,
> Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
> You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
> FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
> For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> Let me know if you have any further query or any job for us. Thanks.
> On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
> Hey there,
>
> Could you tell me where you are located? Also, could you tell me more about your offer?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> > Hi,
>
> > Hope you are great.
>
> > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> > Looking forward to hearing from you. Thanks.
>
> > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
Hi,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Fri, 2 Dec 2022 at 11:38, Roy Nelson <[email protected]> wrote:
Hi,
Hope things are going well.I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Wed, 16 Nov 2022 at 11:34, Roy Nelson <[email protected]> wrote:
Hi,
Hope things are going well.I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Mon, 19 Sept 2022 at 16:10, Roy Nelson <[email protected]> wrote:
Hi,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Fri, 28 Jan 2022 at 15:19, Roy Nelson <[email protected]> wrote:
Paul,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Tue, 11 Jan 2022 at 12:35, Roy Nelson <[email protected]> wrote:
Hi Paul,
See the attached samples for your review and better understanding of our work.Review it and let me know if you have any job for us. Thanks.
On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
Hello,
That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
Paul Ross
CEO, MNesty, LLC
On 10/01/2022 18:42 PM, wrote:
> Hi Paul,
> Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
> You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
> FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
> For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> Let me know if you have any further query or any job for us. Thanks.
> On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
> Hey there,
>
> Could you tell me where you are located? Also, could you tell me more about your offer?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> > Hi,
>
> > Hope you are great.
>
> > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> > Looking forward to hearing from you. Thanks.
>
> > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
Hi,
Hope things are going well.
I’m just checking in.
Do you have any job for us regarding estimating?
Please let me know so we can assist you. Waiting for your reply. Thanks.
On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
Hello,
That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
Paul Ross
CEO, MNesty, LLC
On 10/01/2022 18:42 PM, wrote:
> Hi Paul,
> Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
> You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
> FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
> For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> Let me know if you have any further query or any job for us. Thanks.
> On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
> Hey there,
>
> Could you tell me where you are located? Also, could you tell me more about your offer?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> > Hi,
>
> > Hope you are great.
>
> > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> > Looking forward to hearing from you. Thanks.
>
> > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
Hi,
that sounds impressive! I am excited to hear more about your company. Can you help me with some references, completed projects, partners, etc.?
Paul Ross
CEO, MNesty, LLC
Hi Paul,
Hope you are well.Any update? Please let me know. Thanks.
On Mon, 16 Jan 2023 at 11:58, Roy Nelson <[email protected]> wrote:
Hi Paul,
Hope you are doing well.Our company name is Swift Estimating.We have two offices, one is in Atlanta,GA and the other one is in Chicago,IL. We do every type of Project residential, commercial, government and industrial. We are providing our services all over the US, Canada and Australia.
We use software like BlueBeam, PlanSwift, Xactimate and On Center software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities. For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed so that's how we work.
See below some references from some of our regular clients. and ask them for our accuracy & also see the attached samples for your review and a better understanding of our work & format. I assure you that you will like our work and we will not let you down. Still, if you have any questions or confusion you can call me at 470-284-7295 or text me as well.
Let me know if you have any questions or just send us the plans if you have any job for us. Thanks.
Daniel Hadlich
[email protected]
Northern Mechanical Contractors Inc.
452A Clearview Ave.
Trevose, Pa 19053
Office # 215-322-6142 ext. 101
Cell # 267-228-8098
Bob Nick
Nick Electric
[email protected] Email
815 - 793-4874 Cell
847- 469-8322 office
Rene [email protected]
598 Garden Hwy., Suite #8
Yuba City, CA. 95991
Office -(530)868-4850
470.223.4123
https://www.360specialties.com
Andrea Barnett, MBA
President
Greg GuerinArchitect, NCARBEast Star DesignP.O. Box 53Forney, TX 75126(972) [email protected]
Nelson [email protected]
(917) 679-9665
On Sat, 14 Jan 2023 at 03:18, Paul Ross <[email protected]> wrote:
Hi,
that sounds impressive! I am excited to hear more about your company. Can you help me with some references, completed projects, partners, etc.?
Paul Ross
CEO, MNesty, LLC
On 13/01/2023 21:30 PM, wrote:
> Hi,
>
> Hope things are going well.
> I’m just checking in.
> Do you have any job for us regarding estimating?
> Please let me know so we can assist you. Waiting for your reply. Thanks.
>
> On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
> Hello,
>
> That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 10/01/2022 18:42 PM, wrote:
>
> > Hi Paul,
>
> > Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
>
> > You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
>
> > FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
>
> > For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> >
>
> > Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> >
>
> > Let me know if you have any further query or any job for us. Thanks.
>
> > On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
>
> > Hey there,
>
> >
>
> > Could you tell me where you are located? Also, could you tell me more about your offer?
>
> >
>
> >
>
> >
>
> > Paul Ross
>
> >
>
> > CEO, MNesty, LLC
>
> >
>
> >
>
> >
>
> > On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> >
>
> > > Hi,
>
> >
>
> > > Hope you are great.
>
> >
>
> > > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> >
>
> > > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> >
>
> > > Looking forward to hearing from you. Thanks.
>
> >
>
> > > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
Hello,
can you give me an example of this? I would like to know roughly what it looks like.
Paul Ross
CEO, MNesty, LLC
Hi Paul,
Hope you are well.I think you forget to attach the plans. Please re-attached the plans and mention your scope of work so we can have a look at them and give you a quote and turnaround time. Thanks.
Looking forward to hearing from you.
On Tue, 17 Jan 2023 at 01:19, Paul Ross <[email protected]> wrote:
Hello,
can you give me an example of this? I would like to know roughly what it looks like.
Paul Ross
CEO, MNesty, LLC
On 16/01/2023 20:24 PM, wrote:
> Hi Paul,
> Hope you are well.Any update? Please let me know. Thanks.
> On Mon, 16 Jan 2023 at 11:58, Roy Nelson <[email protected]> wrote:
> Hi Paul,
> Hope you are doing well.Our company name is Swift Estimating.We have two offices, one is in Atlanta,GA and the other one is in Chicago,IL. We do every type of Project residential, commercial, government and industrial. We are providing our services all over the US, Canada and Australia.
>
> We use software like BlueBeam, PlanSwift, Xactimate and On Center software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities. For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed so that's how we work.
> See below some references from some of our regular clients. and ask them for our accuracy & also see the attached samples for your review and a better understanding of our work & format. I assure you that you will like our work and we will not let you down. Still, if you have any questions or confusion you can call me at 470-284-7295 or text me as well.
> Let me know if you have any questions or just send us the plans if you have any job for us. Thanks.
> Daniel Hadlich
> Northern Mechanical Contractors Inc.
> 452A Clearview Ave.
> Trevose, Pa 19053
> Office # 215-322-6142 ext. 101
> Cell # 267-228-8098
>
> Bob Nick
> Nick Electric
> [email protected] Email
> 815 - 793-4874 Cell
> 847- 469-8322 office
>
> Rene [email protected]
> 598 Garden Hwy., Suite #8
> Yuba City, CA. 95991
> Office -(530)868-4850
>
> 470.223.4123
> https://www.360specialties.com
> Andrea Barnett, MBA
> President
>
> Greg GuerinArchitect, NCARBEast Star DesignP.O. Box 53Forney, TX 75126(972) [email protected]
>
> Nelson [email protected]
> (917) 679-9665
>
> On Sat, 14 Jan 2023 at 03:18, Paul Ross <[email protected]> wrote:
> Hi,
>
> that sounds impressive! I am excited to hear more about your company. Can you help me with some references, completed projects, partners, etc.?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 13/01/2023 21:30 PM, wrote:
>
> > Hi,
>
> >
>
> > Hope things are going well.
>
> > I’m just checking in.
>
> > Do you have any job for us regarding estimating?
>
> > Please let me know so we can assist you. Waiting for your reply. Thanks.
>
> >
>
> > On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
>
> > Hello,
>
> >
>
> > That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
>
> >
>
> >
>
> >
>
> > Paul Ross
>
> >
>
> > CEO, MNesty, LLC
>
> >
>
> >
>
> >
>
> > On 10/01/2022 18:42 PM, wrote:
>
> >
>
> > > Hi Paul,
>
> >
>
> > > Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
>
> >
>
> > > You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
>
> >
>
> > > FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
>
> >
>
> > > For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> >
>
> > >
>
> >
>
> > > Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> >
>
> > >
>
> >
>
> > > Let me know if you have any further query or any job for us. Thanks.
>
> >
>
> > > On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
>
> >
>
> > > Hey there,
>
> >
>
> > >
>
> >
>
> > > Could you tell me where you are located? Also, could you tell me more about your offer?
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > Paul Ross
>
> >
>
> > >
>
> >
>
> > > CEO, MNesty, LLC
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> >
>
> > >
>
> >
>
> > > > Hi,
>
> >
>
> > >
>
> >
>
> > > > Hope you are great.
>
> >
>
> > >
>
> >
>
> > > > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> >
>
> > >
>
> >
>
> > > > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> >
>
> > >
>
> >
>
> > > > Looking forward to hearing from you. Thanks.
>
> >
>
> > >
>
> >
>
> > > > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
>
Hi Paul,
Any update? Please let me know. Thanks.
On Tue, 17 Jan 2023 at 11:29, Roy Nelson <[email protected]> wrote:
Hi Paul,
Hope you are well.I think you forget to attach the plans. Please re-attached the plans and mention your scope of work so we can have a look at them and give you a quote and turnaround time. Thanks.
Looking forward to hearing from you.
On Tue, 17 Jan 2023 at 01:19, Paul Ross <[email protected]> wrote:
Hello,
can you give me an example of this? I would like to know roughly what it looks like.
Paul Ross
CEO, MNesty, LLC
On 16/01/2023 20:24 PM, wrote:
> Hi Paul,
> Hope you are well.Any update? Please let me know. Thanks.
> On Mon, 16 Jan 2023 at 11:58, Roy Nelson <[email protected]> wrote:
> Hi Paul,
> Hope you are doing well.Our company name is Swift Estimating.We have two offices, one is in Atlanta,GA and the other one is in Chicago,IL. We do every type of Project residential, commercial, government and industrial. We are providing our services all over the US, Canada and Australia.
>
> We use software like BlueBeam, PlanSwift, Xactimate and On Center software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities. For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed so that's how we work.
> See below some references from some of our regular clients. and ask them for our accuracy & also see the attached samples for your review and a better understanding of our work & format. I assure you that you will like our work and we will not let you down. Still, if you have any questions or confusion you can call me at 470-284-7295 or text me as well.
> Let me know if you have any questions or just send us the plans if you have any job for us. Thanks.
> Daniel Hadlich
> Northern Mechanical Contractors Inc.
> 452A Clearview Ave.
> Trevose, Pa 19053
> Office # 215-322-6142 ext. 101
> Cell # 267-228-8098
>
> Bob Nick
> Nick Electric
> [email protected] Email
> 815 - 793-4874 Cell
> 847- 469-8322 office
>
> Rene [email protected]
> 598 Garden Hwy., Suite #8
> Yuba City, CA. 95991
> Office -(530)868-4850
>
> 470.223.4123
> https://www.360specialties.com
> Andrea Barnett, MBA
> President
>
> Greg GuerinArchitect, NCARBEast Star DesignP.O. Box 53Forney, TX 75126(972) [email protected]
>
> Nelson [email protected]
> (917) 679-9665
>
> On Sat, 14 Jan 2023 at 03:18, Paul Ross <[email protected]> wrote:
> Hi,
>
> that sounds impressive! I am excited to hear more about your company. Can you help me with some references, completed projects, partners, etc.?
>
>
>
> Paul Ross
>
> CEO, MNesty, LLC
>
>
>
> On 13/01/2023 21:30 PM, wrote:
>
> > Hi,
>
> >
>
> > Hope things are going well.
>
> > I’m just checking in.
>
> > Do you have any job for us regarding estimating?
>
> > Please let me know so we can assist you. Waiting for your reply. Thanks.
>
> >
>
> > On Mon, 10 Jan 2022 at 18:49, Paul Ross <[email protected]> wrote:
>
> > Hello,
>
> >
>
> > That is very helpful, thank you. Do you perhaps have some literature I could look at, or could you send me some more information about what exactly makes you unique?
>
> >
>
> >
>
> >
>
> > Paul Ross
>
> >
>
> > CEO, MNesty, LLC
>
> >
>
> >
>
> >
>
> > On 10/01/2022 18:42 PM, wrote:
>
> >
>
> > > Hi Paul,
>
> >
>
> > > Thanks for getting back to me.We are a US based company located in two states Atlanta GA & Chicago IL.We have worked on all type and size of projects throughout USA i.e. Institutional, Federal, Medical, Military, Industrial etc.
>
> >
>
> > > You can outsource all your estimation to us and we promise you best results but we would need your assistance as well.
>
> >
>
> > > FYI- We use software like BlueBeam, PlanSwift, Xactimate and On Centre software to get the quantities out. As our quantities are software based that's why we claim 98-100% accuracy in our quantities.
>
> >
>
> > > For the pricing we use an online source called RS Means and to double check our numbers we directly call vendors and suppliers of the area where the project is going to be executed.
>
> >
>
> > >
>
> >
>
> > > Our cost totally depends on the scope of work, complexity in the plans & the trades you want us to estimate. If you are holding up any project right now then just send over the plans and mention the scope of work so we can have a look at them and give you a quote for the price & turnaround time.
>
> >
>
> > >
>
> >
>
> > > Let me know if you have any further query or any job for us. Thanks.
>
> >
>
> > > On Thu, 6 Jan 2022 at 15:25, Paul Ross <[email protected]> wrote:
>
> >
>
> > > Hey there,
>
> >
>
> > >
>
> >
>
> > > Could you tell me where you are located? Also, could you tell me more about your offer?
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > Paul Ross
>
> >
>
> > >
>
> >
>
> > > CEO, MNesty, LLC
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > On 06/01/2022 20:25 PM, Roy Nelson wrote:
>
> >
>
> > >
>
> >
>
> > > > Hi,
>
> >
>
> > >
>
> >
>
> > > > Hope you are great.
>
> >
>
> > >
>
> >
>
> > > > Do you need Estimate, Scheduling or Architecture Services? We can assist you in the best way.
>
> >
>
> > >
>
> >
>
> > > > Send over the plans or any stuff you have and mention your requirements so we can quote price and time accordingly.
>
> >
>
> > >
>
> >
>
> > > > Looking forward to hearing from you. Thanks.
>
> >
>
> > >
>
> >
>
> > > > BR,Roy Nelson, Swift Estimating | 470-284-7295
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
>