Someone forwarded a spammer's email to Spamnesty, which replied to the email, pretending to be a person called Darlene Moran and starting a conversation.
This is that conversation.
INTERNATIONAL MONETARY FUND AGENCY
Address: 500
N. Capitol St. NW, Washington DC 20221
United States of America,
Phone: +1(202) 996-2958.
ATTN: BENEFICIARY.
This is to
intimate you of a very important information which will be of a great
help to redeem you from all the difficulties you have been experiencing
in getting your long over due payment due to excessive
demand for money from you by both corrupt Bank officials and Courier
Companies after which your fund remain unpaid to you.
I am Mrs. Madame
Christine Lagarde a highly placed official of the International Monetary
Fund (IMF) It may interest you to know that reports have reached our
office by so many correspondence on the uneasy
way which people like you are treated by Various Banks and Courier
Companies across Europe to Africa and Asia and we have decided to put a
stop to that and that is why i was appointed to handle your transaction
here in Washington DC.
All Governmental
and Non-Governmental parasites, NGOs, Finance Companies, Banks, Security
Companies and Courier companies which have been in contact with you of
late have been instructed to back up from
your transaction and you have been advised NOT to respond to them
anymore since the IMF is now directly in charge of your payment.
You are hereby
advised NOT to remit further payment to any institutions with respect to
your transaction as your fund will be transferred to you directly from
our source. I hope this is clear. Any action
contrary to this instructions is at your own risk. The only Money that
you will pay and receive your fund worth $20.5 Million USD They
informed me that the total cost is $60 and i paid $30 which your
partner deposited for the expenses, therefore you should try your best
to send the remaining $30 immediately to enable you receive this payment
in next 24hrs only
for (Final Transfer Pin Code) your $20.5 Million USD will be start
immediately transferring to you and it will reflect into your account as
stated above within 24hrs.
Note: The IMF Pin
Code and your Transfer TAX for $20.5 Million USD is only $30 and it get
to be paid before your transfer Pin Code will be generated and send to
your bank to complete your transfer.
I will do every
thing possible to make sure that you grab this opportunity today so that
you will organize a big party to celebrate the success in getting your
approved fund worth $20.5 Million USD. I am
not a wicked woman as I cannot benefit anything in sitting on your fund
and preventing you from receiving it.
Note, that the
IMF Pin Code and your Transfer TAX must to be secured from the office of
the International Monetary Fund (IMF) in Benin, because that is the
only office that will issue you the original IMF
Pin Code and your Transfer TAX Certificate of this funds since it has
been confirmed that the fund was originated from Benin Republic. You are
advised to send the $30 USD through the MONEY-GARM office for easier
pick up by our cashier agent in Benin with this
information below. Or I
Tunes Card of $30
RECEIVER NAME: UDO ALES
COUNTRY: Benin Republic.
CITY: Cotonou
Amount: $30.00
MTCN:_______
Senders
Name:_______
Congratulation
and remain bless with God, meanwhile we look forward to hear from you. I
Hope to receive good news from you shortly. Thanks and have a great and
wonderful day more ahead. Expecting your urgent
response back. I ask you to do what you can to alleviate the level of
poverty in your region
Yours
faithfully.
Officer
Madame Christine Lagarde, IMF Managing Directors and Chairman of the Executive Board starting July 5, 2011
CC;To United States Treasury Dept,
CC;To United States IMF Agency
CC:To Federal Bureau of Investigation —
Hello,
I am a bit busy now, but I am definitely interested. When can we talk?
Darlene Moran
CEO, MNesty, LLC
Dustin,
Thanks for showing interest in our services.
See the attached some sample estimate for your review and better understanding of our work. Review it thoroughly and let me know if you have any query or if you have any project for estimate then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a free proposal where our charges and turnaround time will be mentioned and after that if you agreed on that proposal then we will make a detailed take-off or estimate. Let me know if you have any question.
Looking forward to hear back from you.
Have a nice weekend.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin Street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-23 23:01, Dustin Moran wrote:
Hello,
can you give me an example of this? I would like to know roughly what
it looks like.
Dustin Moran
CEO, MNesty, LLC
On 23/10/2020 21:01 PM, Paul Anderson wrote:
AMERICAN ESTIMATING
We
provide cost estimation and quantity take-off for general
contractors/sub-contractors/architects and builders.
We
do both residential and commercial projects.
Our
rates are very economical and much lower than the market with no
compromise on the quality of work.
We
have an experienced team of estimators and civil engineers working on
highly rated software.
All
you need to do is just send us your drawings in PDF format and mention the
scope of work then we will send you a free proposal shortly in which our
charges and turnaround time will be mentioned.
As
soon as we get your approval on that proposal our experienced team will
start working on your estimate.
In
order to get a better idea of our work, please ask for sample estimates
and take-offs.
Feel
free to ask us if you have any query regarding our services.
Warm Regards,
Paul Anderson
Senior BDM
AMERICAN ESTIMATING
585-445-3982
Austin Street, Rochester City, NY 14606
www.americanestimating.com
Hello,
I talked to my colleagues about this but they seemed to have some apprehensions; namely, they're worried that the offer isn't fleshed out enough. Would you be able to go into more detail about exactly how this would be structured?
Darlene Moran
CEO, MNesty, LLC
Darlena,
Actually we use couple of software like BlueBeam, PlanSwift, On-Center & Xactimate software to get the quantities out that's why we claim 98-100% accuracy in our quantities and for the pricing is concern we use RSMeans and Timberline and couple of online sources to get the updated prices and to double check those numbers we directly called vendors and suppliers of the area where the project is going to be executed so you have no need to worry. We work according to the plans, specs and according to the client requirements. We can also provide the estimates according to the assumption basis as well when we have incomplete plans. We are always here for your assistance until you are fully satisfied so you have nothing to worry. Let me know if you have any further questions.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-24 07:55, Darlene Moran wrote:
Hello,
I talked to my colleagues about this but they seemed to have some
apprehensions; namely, they're worried that the offer isn't fleshed
out enough. Would you be able to go into more detail about exactly how
this would be structured?
Darlene Moran
CEO, MNesty, LLC
On 23/10/2020 23:06 PM, wrote:
Dustin,
Thanks for showing interest in our services.
See the attached some sample estimate for your review and better understanding of our work. Review it thoroughly and let me know if you have any query or if you have any project for estimate then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a free proposal where our charges and turnaround time will be mentioned and after that if you agreed on that proposal then we will make a detailed take-off or estimate. Let me know if you have any question.
Looking forward to hear back from you.
Have a nice weekend.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin Street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-23 23:01, Dustin Moran wrote:
Hello,
can you give me an example of this? I would like to know roughly what
it looks like.
Dustin Moran
CEO, MNesty, LLC
On 23/10/2020 21:01 PM, Paul Anderson wrote:
AMERICAN ESTIMATING
We
provide cost estimation and quantity take-off for general
contractors/sub-contractors/architects and builders.
We
do both residential and commercial projects.
Our
rates are very economical and much lower than the market with no
compromise on the quality of work.
We
have an experienced team of estimators and civil engineers working on
highly rated software.
All
you need to do is just send us your drawings in PDF format and mention the
scope of work then we will send you a free proposal shortly in which our
charges and turnaround time will be mentioned.
As
soon as we get your approval on that proposal our experienced team will
start working on your estimate.
In
order to get a better idea of our work, please ask for sample estimates
and take-offs.
Feel
free to ask us if you have any query regarding our services.
Warm Regards,
Paul Anderson
Senior BDM
AMERICAN ESTIMATING
585-445-3982
Austin Street, Rochester City, NY 14606
www.americanestimating.com
Darlena,
Actually we use couple of software like BlueBeam, PlanSwift, On-Center & Xactimate software to get the quantities out that's why we claim 98-100% accuracy in our quantities and for the pricing is concern we use RSMeans and Timberline and couple of online sources to get the updated prices and to double check those numbers we directly called vendors and suppliers of the area where the project is going to be executed so you have no need to worry. We work according to the plans, specs and according to the client requirements. We can also provide the estimates according to the assumption basis as well when we have incomplete plans. We are always here for your assistance until you are fully satisfied so you have nothing to worry. Let me know if you have any further questions.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-24 07:55, Darlene Moran wrote:
Hello,
I talked to my colleagues about this but they seemed to have some
apprehensions; namely, they're worried that the offer isn't fleshed
out enough. Would you be able to go into more detail about exactly how
this would be structured?
Darlene Moran
CEO, MNesty, LLC
On 23/10/2020 23:06 PM, wrote:
Dustin,
Thanks for showing interest in our services.
See the attached some sample estimate for your review and better understanding of our work. Review it thoroughly and let me know if you have any query or if you have any project for estimate then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a free proposal where our charges and turnaround time will be mentioned and after that if you agreed on that proposal then we will make a detailed take-off or estimate. Let me know if you have any question.
Looking forward to hear back from you.
Have a nice weekend.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin Street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-23 23:01, Dustin Moran wrote:
Hello,
can you give me an example of this? I would like to know roughly what
it looks like.
Dustin Moran
CEO, MNesty, LLC
On 23/10/2020 21:01 PM, Paul Anderson wrote:
AMERICAN ESTIMATING
We
provide cost estimation and quantity take-off for general
contractors/sub-contractors/architects and builders.
We
do both residential and commercial projects.
Our
rates are very economical and much lower than the market with no
compromise on the quality of work.
We
have an experienced team of estimators and civil engineers working on
highly rated software.
All
you need to do is just send us your drawings in PDF format and mention the
scope of work then we will send you a free proposal shortly in which our
charges and turnaround time will be mentioned.
As
soon as we get your approval on that proposal our experienced team will
start working on your estimate.
In
order to get a better idea of our work, please ask for sample estimates
and take-offs.
Feel
free to ask us if you have any query regarding our services.
Warm Regards,
Paul Anderson
Senior BDM
AMERICAN ESTIMATING
585-445-3982
Austin Street, Rochester City, NY 14606
www.americanestimating.com
Hello,
I am a bit busy now, but I am definitely interested. When can we talk?
Darlene Moran
CEO, MNesty, LLC
Darlene,
I am leaving the office right now. I am available at 10:00 to 06:00 EST. Let me know when you can easy to talk or shoot me an e-mail regarding your queries/questions so we can assist you in best way.
If you are holding up any project right now then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a quotation accordingly.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-26 22:27, Darlene Moran wrote:
Hello,
I am a bit busy now, but I am definitely interested. When can we talk?
Darlene Moran
CEO, MNesty, LLC
On 26/10/2020 16:58 PM, wrote:
Darlena,
Actually we use couple of software like BlueBeam, PlanSwift, On-Center & Xactimate software to get the quantities out that's why we claim 98-100% accuracy in our quantities and for the pricing is concern we use RSMeans and Timberline and couple of online sources to get the updated prices and to double check those numbers we directly called vendors and suppliers of the area where the project is going to be executed so you have no need to worry. We work according to the plans, specs and according to the client requirements. We can also provide the estimates according to the assumption basis as well when we have incomplete plans. We are always here for your assistance until you are fully satisfied so you have nothing to worry. Let me know if you have any further questions.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-24 07:55, Darlene Moran wrote:
Hello,
I talked to my colleagues about this but they seemed to have some
apprehensions; namely, they're worried that the offer isn't fleshed
out enough. Would you be able to go into more detail about exactly how
this would be structured?
Darlene Moran
CEO, MNesty, LLC
On 23/10/2020 23:06 PM, wrote:
Dustin,
Thanks for showing interest in our services.
See the attached some sample estimate for your review and better understanding of our work. Review it thoroughly and let me know if you have any query or if you have any project for estimate then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a free proposal where our charges and turnaround time will be mentioned and after that if you agreed on that proposal then we will make a detailed take-off or estimate. Let me know if you have any question.
Looking forward to hear back from you.
Have a nice weekend.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin Street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-23 23:01, Dustin Moran wrote:
Hello,
can you give me an example of this? I would like to know roughly what
it looks like.
Dustin Moran
CEO, MNesty, LLC
On 23/10/2020 21:01 PM, Paul Anderson wrote:
AMERICAN ESTIMATING
We
provide cost estimation and quantity take-off for general
contractors/sub-contractors/architects and builders.
We
do both residential and commercial projects.
Our
rates are very economical and much lower than the market with no
compromise on the quality of work.
We
have an experienced team of estimators and civil engineers working on
highly rated software.
All
you need to do is just send us your drawings in PDF format and mention the
scope of work then we will send you a free proposal shortly in which our
charges and turnaround time will be mentioned.
As
soon as we get your approval on that proposal our experienced team will
start working on your estimate.
In
order to get a better idea of our work, please ask for sample estimates
and take-offs.
Feel
free to ask us if you have any query regarding our services.
Warm Regards,
Paul Anderson
Senior BDM
AMERICAN ESTIMATING
585-445-3982
Austin Street, Rochester City, NY 14606
www.americanestimating.com
Darlene,
I am leaving the office right now. I am available at 10:00 to 06:00 EST. Let me know when you can easy to talk or shoot me an e-mail regarding your queries/questions so we can assist you in best way.
If you are holding up any project right now then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a quotation accordingly.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-26 22:27, Darlene Moran wrote:
Hello,
I am a bit busy now, but I am definitely interested. When can we talk?
Darlene Moran
CEO, MNesty, LLC
On 26/10/2020 16:58 PM, wrote:
Darlena,
Actually we use couple of software like BlueBeam, PlanSwift, On-Center & Xactimate software to get the quantities out that's why we claim 98-100% accuracy in our quantities and for the pricing is concern we use RSMeans and Timberline and couple of online sources to get the updated prices and to double check those numbers we directly called vendors and suppliers of the area where the project is going to be executed so you have no need to worry. We work according to the plans, specs and according to the client requirements. We can also provide the estimates according to the assumption basis as well when we have incomplete plans. We are always here for your assistance until you are fully satisfied so you have nothing to worry. Let me know if you have any further questions.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-24 07:55, Darlene Moran wrote:
Hello,
I talked to my colleagues about this but they seemed to have some
apprehensions; namely, they're worried that the offer isn't fleshed
out enough. Would you be able to go into more detail about exactly how
this would be structured?
Darlene Moran
CEO, MNesty, LLC
On 23/10/2020 23:06 PM, wrote:
Dustin,
Thanks for showing interest in our services.
See the attached some sample estimate for your review and better understanding of our work. Review it thoroughly and let me know if you have any query or if you have any project for estimate then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a free proposal where our charges and turnaround time will be mentioned and after that if you agreed on that proposal then we will make a detailed take-off or estimate. Let me know if you have any question.
Looking forward to hear back from you.
Have a nice weekend.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin Street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-23 23:01, Dustin Moran wrote:
Hello,
can you give me an example of this? I would like to know roughly what
it looks like.
Dustin Moran
CEO, MNesty, LLC
On 23/10/2020 21:01 PM, Paul Anderson wrote:
AMERICAN ESTIMATING
We
provide cost estimation and quantity take-off for general
contractors/sub-contractors/architects and builders.
We
do both residential and commercial projects.
Our
rates are very economical and much lower than the market with no
compromise on the quality of work.
We
have an experienced team of estimators and civil engineers working on
highly rated software.
All
you need to do is just send us your drawings in PDF format and mention the
scope of work then we will send you a free proposal shortly in which our
charges and turnaround time will be mentioned.
As
soon as we get your approval on that proposal our experienced team will
start working on your estimate.
In
order to get a better idea of our work, please ask for sample estimates
and take-offs.
Feel
free to ask us if you have any query regarding our services.
Warm Regards,
Paul Anderson
Senior BDM
AMERICAN ESTIMATING
585-445-3982
Austin Street, Rochester City, NY 14606
www.americanestimating.com
Hello Darlene,
I hope you are doing well.
I just wanted to confirm that did you get my last e-mail regarding your query? Let me know if you have any job for us then just send over the plans of your project so we will review it and get back to you with a proposal accordingly. Let me know if you have any questions.
Looking forward to hear back from you.
Thanks.
Warm Regards,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
585-445-3982
Austin Street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-26 22:27, Darlene Moran wrote:
Hello,
I am a bit busy now, but I am definitely interested. When can we talk?
Darlene Moran
CEO, MNesty, LLC
On 26/10/2020 16:58 PM, wrote:
Darlena,
Actually we use couple of software like BlueBeam, PlanSwift, On-Center & Xactimate software to get the quantities out that's why we claim 98-100% accuracy in our quantities and for the pricing is concern we use RSMeans and Timberline and couple of online sources to get the updated prices and to double check those numbers we directly called vendors and suppliers of the area where the project is going to be executed so you have no need to worry. We work according to the plans, specs and according to the client requirements. We can also provide the estimates according to the assumption basis as well when we have incomplete plans. We are always here for your assistance until you are fully satisfied so you have nothing to worry. Let me know if you have any further questions.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-24 07:55, Darlene Moran wrote:
Hello,
I talked to my colleagues about this but they seemed to have some
apprehensions; namely, they're worried that the offer isn't fleshed
out enough. Would you be able to go into more detail about exactly how
this would be structured?
Darlene Moran
CEO, MNesty, LLC
On 23/10/2020 23:06 PM, wrote:
Dustin,
Thanks for showing interest in our services.
See the attached some sample estimate for your review and better understanding of our work. Review it thoroughly and let me know if you have any query or if you have any project for estimate then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a free proposal where our charges and turnaround time will be mentioned and after that if you agreed on that proposal then we will make a detailed take-off or estimate. Let me know if you have any question.
Looking forward to hear back from you.
Have a nice weekend.
Thanks.
Best Regard,
Paul Anderson
Business Development Manager
AMERICAN ESTIMATING
Austin Street, Rochester City, NY 14606
www.americanestimating.com
On 2020-10-23 23:01, Dustin Moran wrote:
Hello,
can you give me an example of this? I would like to know roughly what
it looks like.
Dustin Moran
CEO, MNesty, LLC
On 23/10/2020 21:01 PM, Paul Anderson wrote:
AMERICAN ESTIMATING
We
provide cost estimation and quantity take-off for general
contractors/sub-contractors/architects and builders.
We
do both residential and commercial projects.
Our
rates are very economical and much lower than the market with no
compromise on the quality of work.
We
have an experienced team of estimators and civil engineers working on
highly rated software.
All
you need to do is just send us your drawings in PDF format and mention the
scope of work then we will send you a free proposal shortly in which our
charges and turnaround time will be mentioned.
As
soon as we get your approval on that proposal our experienced team will
start working on your estimate.
In
order to get a better idea of our work, please ask for sample estimates
and take-offs.
Feel
free to ask us if you have any query regarding our services.
Warm Regards,
Paul Anderson
Senior BDM
AMERICAN ESTIMATING
585-445-3982
Austin Street, Rochester City, NY 14606
www.americanestimating.com
Hi,
We provide cost estimation and quantity take-off for general contractors/sub-contractors/architects and builders.
We do both residential and commercial projects.
All you need to do is just send us your drawings in PDF format and mention the scope of work then we will send you a free proposal shortly in which our charges and turnaround time will be mentioned
As soon as we get your approval on that proposal our experienced team will start working on your estimate.
Feel free to ask us if you have any query regarding our services.
Best Regard,
Alex StephenSenior Marketing ManagerAMERICAN ESTIMATING
Hello,
Can you give me some more info about what you're offering? Specifically, how does it apply to our business? How can we use this?
Darlene Moran
CEO, MNesty, LLC
Hi Darlene,
I hope you are doing well.Actually we are an estimation providing company. We provide cost estimation and quantity take-off services for both residential and commercial projects in all over the USA and Canada as well.
We use couple of softwares like BlueBeam, PlanSwift, On-Center & Xactimate software to get the quantities out that's why we claim (98-100%) accuracy in our quantities and for the pricing is concern we use RSMeans and Timberline and couple of online sources to get the updated prices and to double check those numbers we directly called vendors and suppliers of the area where the project is going to be executed so that's how we work.
Currently we are offering (40-50%) discount on new projects.
If you are holding up any project right now then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a free proposal where our charges and turnaround time will be mentioned and after that if you agree on that proposal then we will make a detailed take-off and estimate.
Let me know if you have any further questions. For more information please visit our website www.americanestimating.com
Looking forward to hear back from you.Thanks.
Best Regard,
Alex StephenSenior Marketing ManagerAMERICAN ESTIMATING
On Thu, Jun 30, 2022 at 1:00 PM Darlene Moran <[email protected]> wrote:
Hello,
Can you give me some more info about what you're offering? Specifically, how does it apply to our business? How can we use this?
Darlene Moran
CEO, MNesty, LLC
On 29/06/2022 21:38 PM, wrote:
> Hi,
> We provide cost estimation and quantity take-off for general contractors/sub-contractors/architects and builders.
>
> We do both residential and commercial projects.
>
> All you need to do is just send us your drawings in PDF format and mention the scope of work then we will send you a free proposal shortly in which our charges and turnaround time will be mentioned
> As soon as we get your approval on that proposal our experienced team will start working on your estimate.
>
> Feel free to ask us if you have any query regarding our services.
>
>
> Best Regard,
>
> Alex StephenSenior Marketing ManagerAMERICAN ESTIMATING
>
Hi,
Sounds great, how can we proceed? We're interested in getting started pretty much immediately, as we could use this.
Darlene Moran
CEO, MNesty, LLC
Darlene,
If you are interested in our services then just send over the plans of your project and mention the scope of work like the items which you are looking for so we will review the plans and get back to you with a quotation where our charges and turnaround time will be mentioned and after that if you agree on that quotation then we will make a detailed take-off and estimate. Let me know if you have any question
Looking forward to hear back from you.Thanks.
Best Regard,
Alex StephenSenior Marketing ManagerAMERICAN ESTIMATING
On Fri, Jul 1, 2022 at 5:14 AM Darlene Moran <[email protected]> wrote:
Hi,
Sounds great, how can we proceed? We're interested in getting started pretty much immediately, as we could use this.
Darlene Moran
CEO, MNesty, LLC
On 30/06/2022 15:40 PM, wrote:
> Hi Darlene,
> I hope you are doing well.Actually we are an estimation providing company. We provide cost estimation and quantity take-off services for both residential and commercial projects in all over the USA and Canada as well.
> We use couple of softwares like BlueBeam, PlanSwift, On-Center & Xactimate software to get the quantities out that's why we claim (98-100%) accuracy in our quantities and for the pricing is concern we use RSMeans and Timberline and couple of online sources to get the updated prices and to double check those numbers we directly called vendors and suppliers of the area where the project is going to be executed so that's how we work.
> Currently we are offering (40-50%) discount on new projects.
> If you are holding up any project right now then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a free proposal where our charges and turnaround time will be mentioned and after that if you agree on that proposal then we will make a detailed take-off and estimate.
> Let me know if you have any further questions. For more information please visit our website www.americanestimating.com
> Looking forward to hear back from you.Thanks.
>
> Best Regard,
>
> Alex StephenSenior Marketing ManagerAMERICAN ESTIMATING
> On Thu, Jun 30, 2022 at 1:00 PM Darlene Moran <[email protected]> wrote:
> Hello,
>
> Can you give me some more info about what you're offering? Specifically, how does it apply to our business? How can we use this?
>
>
>
> Darlene Moran
>
> CEO, MNesty, LLC
>
>
>
> On 29/06/2022 21:38 PM, wrote:
>
> > Hi,
>
> > We provide cost estimation and quantity take-off for general contractors/sub-contractors/architects and builders.
>
> >
>
> > We do both residential and commercial projects.
>
> >
>
> > All you need to do is just send us your drawings in PDF format and mention the scope of work then we will send you a free proposal shortly in which our charges and turnaround time will be mentioned
>
> > As soon as we get your approval on that proposal our experienced team will start working on your estimate.
>
> >
>
> > Feel free to ask us if you have any query regarding our services.
>
> >
>
> >
>
> > Best Regard,
>
> >
>
> > Alex StephenSenior Marketing ManagerAMERICAN ESTIMATING
>
> >
>
>
>
>
>
>
>
>
Hi Darlene,
I hope you are doing well.We didn't receive any response from your side. Let me know if you are interested in our services and if you are holding up any project right now then just send us the plans of your project and mention the scope of work like the items which you are looking for so we will review it and get back to you with a quotation where our charges and turnaround time will be mentioned and after that if you agree on that quote then we will make a detailed take-off or estimate according to your plans and specifications. Let me know if you have any further questions.
Looking forward to hear from you soon.Thanks.
Best Regard,
Alex StephenSenior Marketing ManagerAMERICAN ESTIMATING
On Fri, Jul 1, 2022 at 5:14 AM Darlene Moran <[email protected]> wrote:
Hi,
Sounds great, how can we proceed? We're interested in getting started pretty much immediately, as we could use this.
Darlene Moran
CEO, MNesty, LLC
On 30/06/2022 15:40 PM, wrote:
> Hi Darlene,
> I hope you are doing well.Actually we are an estimation providing company. We provide cost estimation and quantity take-off services for both residential and commercial projects in all over the USA and Canada as well.
> We use couple of softwares like BlueBeam, PlanSwift, On-Center & Xactimate software to get the quantities out that's why we claim (98-100%) accuracy in our quantities and for the pricing is concern we use RSMeans and Timberline and couple of online sources to get the updated prices and to double check those numbers we directly called vendors and suppliers of the area where the project is going to be executed so that's how we work.
> Currently we are offering (40-50%) discount on new projects.
> If you are holding up any project right now then just send over the plans of your project and mention the scope of work so we will review it and get back to you with a free proposal where our charges and turnaround time will be mentioned and after that if you agree on that proposal then we will make a detailed take-off and estimate.
> Let me know if you have any further questions. For more information please visit our website www.americanestimating.com
> Looking forward to hear back from you.Thanks.
>
> Best Regard,
>
> Alex StephenSenior Marketing ManagerAMERICAN ESTIMATING
> On Thu, Jun 30, 2022 at 1:00 PM Darlene Moran <[email protected]> wrote:
> Hello,
>
> Can you give me some more info about what you're offering? Specifically, how does it apply to our business? How can we use this?
>
>
>
> Darlene Moran
>
> CEO, MNesty, LLC
>
>
>
> On 29/06/2022 21:38 PM, wrote:
>
> > Hi,
>
> > We provide cost estimation and quantity take-off for general contractors/sub-contractors/architects and builders.
>
> >
>
> > We do both residential and commercial projects.
>
> >
>
> > All you need to do is just send us your drawings in PDF format and mention the scope of work then we will send you a free proposal shortly in which our charges and turnaround time will be mentioned
>
> > As soon as we get your approval on that proposal our experienced team will start working on your estimate.
>
> >
>
> > Feel free to ask us if you have any query regarding our services.
>
> >
>
> >
>
> > Best Regard,
>
> >
>
> > Alex StephenSenior Marketing ManagerAMERICAN ESTIMATING
>
> >
>
>
>
>
>
>
>
>